Ball bearing pillow block construction designed specifically for applications for moving air with high moisture content.

Suitable for spray booths, ducts, industrial washing machines.

Sealed ball bearings with external grease fittings.

Fan can be installed in any position.

Propellers non-sparking cast aluminum.

Fan housing is heavy gauge steel with angle iron rings welded on each end for superior strength. Eight holes in angle rings

     for easy mounting.

Standard construction 225º F. Temperatures up to 375º F with special construction.

Motors - only high quality industrial motors are used. Fans with motors are completely assembled, drives properly adjusted, and

      fan tested at the factory before shipping. Motors are available in open drip proof, totally enclosed, and explosion proof.

Cast steel and turned steel sheaves.

Adjustable motor base.

Bearings are located in the belt tube, removed from the contaminated air stream. Belt tube interior is protected from contaminated

     air in duct by water slinger, dust cover, and shaft seals.