HEAT WAVE PORTABLE ELECTRIC SALAMANDER
 
 
 
You MUST have Adobe Acrobat Reader to view any literature downloaded from this website.
AVERAGE MINUTES TO ACHIEVE TEMPERATURE RISE*
Building Size
1000 SQ. FEET
1500 SQ. FEET
2000 SQ. FEET
  TEMP. RISE TEMP. RISE TEMP. RISE
HEATER: 20 °F 40 ºF 20 ºF 40 ºF 20 ºF 40 ºF
10 KW 70 min 140 min 105 min 210 min --- ---
15 KW 47 min 94 min 142 min 142 min 94 min 188 min
30 KW 23 min 46 min 35 min 70 min 47 min 94 min
*Based on a 15' ceiling height - lower ceiling height will reduce time required.
 
- Safety yellow heater enclosure with safety screens on both air intake and output openings.
- Optional 25' long SO type cord, ready for plug attachment is available for each model.
- Long-life finned tubular heating elements.                  - High-limit thermal cutout switch.
- Thermostat adjustment 40º to 100º F.                        - Fan only switch.
- Magnetic contactor.                                                   - 10" wheels.
- Automatic reset.                                                       - 800 CFM-15KW units - 1100 CFM-30KW units.

 
PURCHASE
 UPC
MODEL
KW

BTU'S
VOLTS
PHASE
AMPS

TEMP

RISE

 WT.
886017
FES-1520-3A
15
51195
208
  3 42 45ºF 65 lbs
886079
FES-1524-1A
15
51195
240
  1 63 45ºF 69 lbs
881441
FES-1524-3E
15
51195
240
  3 36 45ºF 65 lbs
886031
FES-1548-3E
15
51195
480
  3 18 45ºF 65 lbs
886055
FES-3048-3A
30
102390
480
  3 36 90ºF 83 lbs
 
 
10KW - 240V - 1 PHASE FACTORY PRE-WIRED MODEL WITH 10FT. CABLE & STRAIGHT BLADE RANGE PLUG FOR USE WITH A STANDARD RANGE OUTLET.
PURCHASE
UPC
MODEL

KW
BTU'S
VOLTS
PHASE AMPS TEMP RISE WT.
200134
FES-1024-1CA
10
34130
 240 1 42 30ºF 60 lbs
 
CEILING MOUNT

WALL MOUNT
WALL / CEILING MOUNT ELECTRIC SALAMANDER
PURCHASE UPC MODEL KW BTU'S VOLTS PHASE AMPS

TEMP

RISE

 WT.
886086
YES-1520-3A
15
51195
208
  3 42 45ºF 60 lbs
886185
YES-1524-1A
15
51195
240
  1 63 45ºF 60 lbs
886093
YES-1524-3E
15
51195
240
  3 36 45ºF 60 lbs
886109
YES-1548-3E
15
51195
480
  3 18 45ºF 60 lbs
886123
YES-3048-3A
30
102390
480
  3 36 90ºF 72 lbs
- Wall /Ceiling Mount Included with Unit.
- Unit ready for Direct Wiring.
 
 
BDH SERIES Portable Electric Blower Heaters
 
 
 
You MUST have Adobe Acrobat Reader to view any literature downloaded from this website.
 

*  HEAVY DUTY FINTUBE METAL SHEATH HEATING ELEMENT

*  UL AND CSA APPROVED

*  7.5, 10.0, 15.0, 20.0 AND 30.0 KW HEAT OUTPUTS AVAILABLE

*  VOLTAGES INCLUDE 208, 240, 480 AND 600   

*  FAN ONLY OPERATION FOR SUMMER COOLING.

*  SINGLE AND THREE PHASE OPERATION.

*  SHIPPED FULLY ASSEMBLED.

*  SAFE TO OPERATE IN UNATTENDED AREAS. 

                            

 
 
APPLICATIONS
    The high output, industrial grade, portable electric blower is a working monster. The BDH series heater can be left unattended without the threat of poisoning from combustion by-products, associated with fuel fired heaters. Practical users are factories, enclosed areas where the ceiling height is no higher than 15 feet, assembly areas, enclosed smoking areas, building construction where "localized" temporary heat is needed, and repair stations are just a few examples of where BDH Series portable blower heaters can be used.
 
DESCRIPTION
    The BDH Series portable electric blower heater is an excellent choice to heat areas that are indoors and enclosed with ceiling heights of 15 feet or less. The brightly painted heater enclosure is a structural frame consisting of two spun rings and two formed channels that support a 20 gauge steel cylinder. The enclosure is phosphate coated for corrosion resistance, and finished in powder coat paint. The heating cylinder pivots vertically to direct airflow. The BDH Series has five wattage outputs to choose from and starting as low as 7.5KW.
    The built-in safety features include an adjustable thermostat (range 40ºF to 100ºF) to control the outlet air temperature, auto-reset thermal cutouts for the fan motor and heating elements. The thermostat provides settings for full OFF, fan only, and temperature control in the heating setting.
    BDH Series heaters feature a large, easily accessible control and wiring compartment containing a 3 pole magnetic contactor; a 120-volt control transformer and motor starter that provides additional safety on 480 and 600-volt models. Front and rear grilles are 10 gauge finished black powder coat and are designed to meet OSHA safety requirements.
 
PURCHASE

CATALOG

NUMBER
KW

VOLTS
BTU's
PHASE
AMPS SHIP WT.
BDH1021C*
10
 240 34,120 1 41.7 65 lbs
BDH0783 7.5 208 25,590 1 and 3 36.3/21.0 65 lbs
BDH1023 10 240 34,120 1 and 3 41.7 65 lbs
BDH1583 15 208 51,180 3 41.8 65 lbs
BDH1523 15 240 51,180  3 36.3 65 lbs
BDH1521 15 240 51,180 1 62.5 65 lbs
BDH1543 15 480 51,180 1 and 3 31.4/18.2 65 lbs
BDH2043 20 480 68,240 1 and 3 41.6/24.4 75 lbs
BDH3043 30 480 102,360  3 36.3 75 lbs
BDH3063 30 600 102,360  3 29.1 75 lbs

*Model BDH1021C is shipped with power cord and plug.

Note: All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.

 
               Home |  Contact Us   |   Policies   |   About Us   |   Services   |  Facilities   |  Online Store   |   Products