Single Inlet Wheel
|
| 6-5/16" Dia. Single Inlet Blower Wheel |
$18.48 |
| 6-5/16" Dia., 2-1/16" Width, CW or CCW Rotation, 1/2" Bore, 3450 Max. RPM |
|
 |
Please Specify Rotation (determined from closed end of backplate - see illustration).
TYPICAL APPLICATIONS:
- Fan Coil Units.
- Room Air Conditioners.
- Draft Inducers.
- Power Burners.
- Heaters.
- Packaged terminal Air Conditioners (PTAC) systems.
FEATURES:
- Galvanized Steel Construction.
- Some wheels can be bored to fit odd/larger sizes up to 5/8".
- Add bushings for smaller bore sizes.
- Allen head set screws for easy reversibility.
- Can combine 2 to replace double inlet wheels by using one CW and one CCW (may be different widths to make up space but diameters must be the same). For wheels too close to apparatus to reach with driver, tighten wheels to shaft by using extended "T" Allen wrench inserted through a notch in one of the blades in each wheel. CAUTION: To avoid potential vibration, allow slight air gap (min. 1/32") between wheels. |
|