Performance Chart
|
| 22" Dia. 5 Blade Prop. |
$38.27 |
| 22" Dia. - 27 Deg. Pitch |
|
 |
Please Specify Rotation (determined from air discharge side). Interchangeable Hub Required.
TYPICAL APPLICATIONS:
Condenser type propellers utilize square pressure-type blades required for most condenser applications.
The 3-blade configuration is normally used in low pressure applications. 4- and 5- blade configurations are suited for higher static pressures.
These propellers are designed for use in:
- Air Conditioning Condensers
- Power Roof Ventilators
- Heat Pumps
- Heat Exchangers
- Roof Top Air Conditioners
- Commercial and Industrial Equipment
- Unit Heaters
- Agricultural Ventilation Equipment
- Walk-in Refrigeration Units
- General Cooling/Heating Applications
FEATURES:
- High quality aluminum blades.
- Interchangeable hubs available from 1/4" through 3/4" bore...may be attached on either intake or discharge side.
- Pitches available for most common horsepower and motor speeds up to 1725 RPM in both CW and CCW rotations.
TECHNICAL TIP:
Did you know you can replace a 3-blade condenser fan with a 4- or 5-blade fan? If you do this choose a replacement that matches the CFM required as nearly as possible and ensure the brake HP required does not exceed the nameplate rating of the motor. |
|