View Wheel from Hub Side to Determine Rotation
|
| 11-1/8" Dia. Double Inlet Direct Drive Blower Wheel |
$47.62 |
| 11-1/8" Dia., 8" Width, CW or CCW Rotation, 1/2" Bore, 1750 Max. RPM |
|
 |
Please Specify Rotation - Viewed From Hub Side
Center Disc = Convex
Y=11-1/8"
W=8"
D=10-5/8"
X=8-7/8"
U=1-1/4"
Z=1-15/16"
H=48
J=1"
CONSTRUCTION: Galvanized, cold-rolled steel.
TEMPERATURE: Due to temperature limitations of most motors, these wheels are recommended for application temperatures not exceeding 135 Deg.F(60 Deg.C). Wheels are rated to 200Deg.F
SERVICE TIP: If opposite rotation is required, mount motor on hub side. Set screw must be converted to Allen head screw and then tightened through the blades, using "T" Allen wrench. (May have to notch blade above set screw to provide access for "T" Allen wrench.)
Model #DD10-8A |
|